08-27-2019, 08:29 AM
Explosive View
Sparts instruction
1. Stainless Steel hand pump
The pump lever can quickly raise the internal pressure up to the maximum of 2.5 bar.
2. Release Valve
The safety valve protects the appliace against excess pressure build-up.
3. Lock Button
Convenient to continue operation
4. Fan Nozzle
5. Handle
6. 1.5L bottle
Specification
Item noWR-FS03
Total capacity1.80L
Working capacity1.50L
Pressure release valve2.5Bar
Working pressure36.5-43.8PSI
Net weight0.425kg
Features
-Rich foam
-Flat fan spray nozzle
-No need other tools,the foam bottle can generate rich foam just through hand pumping.
-It is easy and convenient to use it for cleaning carpets,kitchen,bathroom,car......
WR-FS03 is a hand pump foam sprayer, it can be used for car washing, home cleaning or industrial cleaning. Other than high pressure foam cannon and garden hose foam sprayer, it is more convenient to use. Pouring the mixed solution into the bottle then screw the cover and pump.
Usage Instructions
1. Please read the instruction manual carefully and assemble the pressure foam sprayer properly.
2. Check whether each part is screwed tightly.If not already completed，attach the clear siphon straw to the small hole found on bottom of the tank holder attachment and check that siphon is securely connected.
3. Infuse right amount of washing fluid.(The capacity of the bottle is 1500ml.)
4. Prepare the bottle by filling the soap solution with water, it’s adjustable to keep the mixed solution at 1L postion which is printed in bottle, then shake evenly.
5. Carefully attach full canister to the tank holder and securely tighten.
6. Using the top handle,manually pump until pressure builds up in tank.Do not over pump.Push button on handle to apply.
7. Before storing the unit, rinse out soap solution bottle and run plain water thoroughly.Fill clean water into the cleaned bottle to clean the head a few minutes.To prevent the coagulation of detergent after drying, please clean the head after immersion in water.
Attentions
1. To correctly use this product and before proceeding to its installation or to its dismantling, carefully read and follow the instructions.
2. Any improper use of this product or any tampering of the same may endanger workers.
3. Never mix with other kinds of detergents.
4. Please don't use it on human being.
5. Please don't use it for other purpose.
6. Please read the attentions of washing products and emergency measures.
7. Please pay attention to the possible liquid leak when lay down the foam sprayer which loaded with detergent.
8.Manually diluting the soap prior to use is required.For more foam,increase the soap to water ratio by adding more soap and less water to tank.For less foam,decrease the soap to water ratio by adding less soap and more water to tank.
All parts should be right before using; 2. Manually pump sprayer until pressure builds up in tank if you want great performance; 3. You are suggested to pour the mixed solution at the soap & water line.
Maintenance
In order to avoid failures,the Foam Sprayer must be cleaned after use.
1. Fill clean water into the cleaned bottle to clean the head a few minutes.
2. To prevent the coagulation of detergent after drying, please clean the
head after immersion in water.
FAQ
-Why is it important to wash my car?
In addition to keeping your car looking great, regular washing removes soils such as
bird droppings, bugs, and pollution that can damage your car's finish.
-Why to buy hand pressure foam bottle?
This is ideal if you don't want to get an achey hand squeezing a handle all the time,
really easy to use just pump up and down then it's ready to use, lasts some time per
pump up on a fine spray mode.
-Which detergent do I use for hand pressure foam bottle?
Normal wash products are all suitable.
-What advantages?
1. Chemical resistant seals for extended use with harsh chemicals
2. Pressure relief valve releases excess pressure
3. Solid and stable pressure resistant container with wide opening, easy filling.
4. Strong & comfortable pump handle for safe and convenient working.
-How to use hand pressure foam bottle?
1. Fill the tank with proper car wash soap or foam detergent followed the indicator line.
2. Screw the pump cap head onto the bottle.
3. Press the pump and make it in a full pressure condition.
-How much detergent do I need to use in my hand pressure foam bottle?
100mL diluted or according to actual solution concentration with warm water into your foam bottle.
-Can I use hand pressure foam bottle for other purposes?
Ideal for garden use, plant protection. Easy to use for spraying pests, weeds and
diseased plants.
-Is customisation possible?
Yes,we can custom in color or other things as requested.
-Can I have sample? What is the price?
Sample usually sent in two days when paid,price includes product fee and delivery
fee,you can contact for details.
-What is the package?
1set/white box, 15sets/cartonHand Pressure Foam Sprayer factory
website:http://www.weirransprayer.com/foam-generator/hand-pressure-foam-sprayer/
Sparts instruction
1. Stainless Steel hand pump
The pump lever can quickly raise the internal pressure up to the maximum of 2.5 bar.
2. Release Valve
The safety valve protects the appliace against excess pressure build-up.
3. Lock Button
Convenient to continue operation
4. Fan Nozzle
5. Handle
6. 1.5L bottle
Specification
Item noWR-FS03
Total capacity1.80L
Working capacity1.50L
Pressure release valve2.5Bar
Working pressure36.5-43.8PSI
Net weight0.425kg
Features
-Rich foam
-Flat fan spray nozzle
-No need other tools,the foam bottle can generate rich foam just through hand pumping.
-It is easy and convenient to use it for cleaning carpets,kitchen,bathroom,car......
WR-FS03 is a hand pump foam sprayer, it can be used for car washing, home cleaning or industrial cleaning. Other than high pressure foam cannon and garden hose foam sprayer, it is more convenient to use. Pouring the mixed solution into the bottle then screw the cover and pump.
Usage Instructions
1. Please read the instruction manual carefully and assemble the pressure foam sprayer properly.
2. Check whether each part is screwed tightly.If not already completed，attach the clear siphon straw to the small hole found on bottom of the tank holder attachment and check that siphon is securely connected.
3. Infuse right amount of washing fluid.(The capacity of the bottle is 1500ml.)
4. Prepare the bottle by filling the soap solution with water, it’s adjustable to keep the mixed solution at 1L postion which is printed in bottle, then shake evenly.
5. Carefully attach full canister to the tank holder and securely tighten.
6. Using the top handle,manually pump until pressure builds up in tank.Do not over pump.Push button on handle to apply.
7. Before storing the unit, rinse out soap solution bottle and run plain water thoroughly.Fill clean water into the cleaned bottle to clean the head a few minutes.To prevent the coagulation of detergent after drying, please clean the head after immersion in water.
Attentions
1. To correctly use this product and before proceeding to its installation or to its dismantling, carefully read and follow the instructions.
2. Any improper use of this product or any tampering of the same may endanger workers.
3. Never mix with other kinds of detergents.
4. Please don't use it on human being.
5. Please don't use it for other purpose.
6. Please read the attentions of washing products and emergency measures.
7. Please pay attention to the possible liquid leak when lay down the foam sprayer which loaded with detergent.
8.Manually diluting the soap prior to use is required.For more foam,increase the soap to water ratio by adding more soap and less water to tank.For less foam,decrease the soap to water ratio by adding less soap and more water to tank.
All parts should be right before using; 2. Manually pump sprayer until pressure builds up in tank if you want great performance; 3. You are suggested to pour the mixed solution at the soap & water line.
Maintenance
In order to avoid failures,the Foam Sprayer must be cleaned after use.
1. Fill clean water into the cleaned bottle to clean the head a few minutes.
2. To prevent the coagulation of detergent after drying, please clean the
head after immersion in water.
FAQ
-Why is it important to wash my car?
In addition to keeping your car looking great, regular washing removes soils such as
bird droppings, bugs, and pollution that can damage your car's finish.
-Why to buy hand pressure foam bottle?
This is ideal if you don't want to get an achey hand squeezing a handle all the time,
really easy to use just pump up and down then it's ready to use, lasts some time per
pump up on a fine spray mode.
-Which detergent do I use for hand pressure foam bottle?
Normal wash products are all suitable.
-What advantages?
1. Chemical resistant seals for extended use with harsh chemicals
2. Pressure relief valve releases excess pressure
3. Solid and stable pressure resistant container with wide opening, easy filling.
4. Strong & comfortable pump handle for safe and convenient working.
-How to use hand pressure foam bottle?
1. Fill the tank with proper car wash soap or foam detergent followed the indicator line.
2. Screw the pump cap head onto the bottle.
3. Press the pump and make it in a full pressure condition.
-How much detergent do I need to use in my hand pressure foam bottle?
100mL diluted or according to actual solution concentration with warm water into your foam bottle.
-Can I use hand pressure foam bottle for other purposes?
Ideal for garden use, plant protection. Easy to use for spraying pests, weeds and
diseased plants.
-Is customisation possible?
Yes,we can custom in color or other things as requested.
-Can I have sample? What is the price?
Sample usually sent in two days when paid,price includes product fee and delivery
fee,you can contact for details.
-What is the package?
1set/white box, 15sets/cartonHand Pressure Foam Sprayer factory
website:http://www.weirransprayer.com/foam-generator/hand-pressure-foam-sprayer/